Introduction
If you’re planning an epoxy flooring project in Geelong, the first question is almost always the same: what’s it actually going to cost? Prices vary more than most people expect, depending on the size of the area, the condition of your existing concrete, and the type of epoxy system you choose.
This guide breaks down real 2026 Australian pricing for epoxy flooring, so you know what to expect before you request a quote — and what separates a fair price from a corner-cutting one.
Quick Answer
Professionally installed epoxy flooring in Australia costs $45–$150 per square metre in 2026. A single garage (18–20 m²) typically runs $1,200–$1,800; a double garage (36–40 m²) runs $2,200–$3,500.
Average Epoxy Flooring Cost in 2026
Across the Australian market, professionally installed epoxy flooring typically costs between $45 and $150 per square metre, including surface preparation, materials, and labour. Basic single-colour garage floors sit at the lower end of that range, while decorative flake systems and premium metallic finishes push toward the top.
Most contractors also apply a minimum project charge — usually between $1,200 and $2,000 — even for smaller spaces like a single garage or courtyard, since setup and preparation costs don’t scale down proportionally with area.
Epoxy Flooring Cost by Space
| Space | Typical Area | Estimated Cost |
| Single garage | 18–20 m² | $1,200 – $1,800 |
| Double garage | 36–40 m² | $2,200 – $3,500 |
| Patio or courtyard | 20–30 m² | $1,500 – $3,000 |
| Small commercial / retail floor | Up to 200 m² | $6,000 – $15,000 |
| Warehouse / industrial floor | 500 m²+ | $30,000 – $45,000+ |
Larger areas typically bring the per-square-metre rate down, since fixed setup and equipment costs get spread across more floor space — but the total project cost still rises with size, so budgeting by total area matters more than fixating on the per-metre figure alone.
Cost by Epoxy System Type
The type of epoxy system you choose has the biggest impact on price after floor size:
- Solid colour coating ($45–$75/m²): A straightforward two-coat system in a single colour. Suits garages, storage areas, and budget-conscious residential jobs.
- Flake / quartz systems ($60–$110/m²): Decorative vinyl flakes broadcast into the base coat for texture, multi-tone colour, and improved slip resistance. The most popular choice for Australian garages.
- Metallic epoxy ($100–$180/m²): A premium finish using metallic pigments for a pearlescent, marble-like look. Popular for showrooms and feature floors.
- Heavy-duty polyurethane / industrial systems ($120–$250/m²): Thick, chemical- and impact-resistant systems built for commercial kitchens, factories, and high-traffic industrial floors.
See our full Epoxy Flooring Geelong service page or Flake Flooring Geelong page for finish options and photos.
What Affects Your Epoxy Flooring Quote
Surface Preparation
Epoxy cannot properly bond to cracked, oily, or uneven concrete. Professional preparation — typically mechanical diamond grinding, crack repair, and priming — often accounts for a significant share of the total quote, and older slabs generally need more of it than newer ones.
⚠️ This is the step budget quotes most commonly skip — and it’s the most common reason a “cheap” epoxy floor fails within its first year. See our Concrete Grinding page for how we prep every slab properly.
Moisture Barriers
Concrete slabs with high moisture vapour transmission need a specialised moisture barrier before coating. Where this applies, it typically adds to the overall cost, but skipping it on a slab that needs one is one of the fastest ways to see bubbling and delamination down the track.
Topcoats
A UV-stable polyurethane or polyaspartic topcoat protects against yellowing from sun exposure — genuinely important in Australian conditions — and adds to the overall system cost, but significantly extends the floor’s lifespan and appearance.
Access and Location
Hard-to-reach areas, tight site access, or jobs requiring extensive furniture and equipment removal can add to labour time and therefore total cost.
DIY Epoxy Kits vs Professional Installation
Hardware-store DIY epoxy kits are tempting at $20–$40 per square metre, but they typically use water-based formulas with only 40–50% solid content, producing a thin film that’s far less durable than a professional system. Professional-grade 100% solids epoxy creates a thicker, more impact-resistant surface that can last 10–20 years with proper care, compared to a DIY coating that often needs redoing within a few years.
For high-traffic areas like garages and driveways, the long-term cost difference usually favours professional installation once you account for how often a DIY coating needs to be reapplied.
Frequently Asked Questions
How much does it cost to epoxy a double garage in Geelong?
A standard double garage (around 36–40 m²) typically costs between $2,200 and $3,500 for a professionally installed flake system, including surface preparation and a UV-stable topcoat.
Why do epoxy flooring quotes vary so much between contractors?
The biggest driver is what’s included. A low quote often skips proper diamond-grinding preparation or uses a thinner, lower-solids coating. Always ask what surface prep, coating thickness, and topcoat are included before comparing prices.
Is epoxy flooring worth it for a residential garage?
Yes, for most homeowners. Beyond the appearance, a properly installed epoxy floor protects the concrete from oil stains, dusting, and wear, and it’s significantly easier to clean than bare concrete.
How long does professional epoxy flooring last?
With proper surface preparation and a UV-stable topcoat, professionally installed epoxy flooring typically lasts 10 to 20 years in Australian conditions, depending on traffic levels and maintenance.
Ready to Transform Your Concrete?
Get a free, no-obligation quote for your epoxy flooring project today.