Epoxy Floor Quote in Geelong: What to Measure, Photograph and Ask Before You Call

Quick answer: To get an accurate epoxy floor quote in Geelong, have four things ready before you call: the rough size of the floor, a few clear photos of the slab, the age of the concrete, and what the space will be used for. With those, a coating specialist can give you a realistic price range without guessing. Without them, you get a vague number that changes the day someone turns up.

You ring three companies about the same garage. One says it will be cheap. One says it will cost double. One will not give a number at all.

Same floor. Three very different answers.

It is not always because someone is dodgy. Most of the time, they are all guessing, because nobody has told them what the slab is actually like. Give them the right information and the quotes start lining up.

Why epoxy quotes vary so much

The coating is only part of the job. Most of the cost and most of the risk sits in what happens before it goes on: grinding, crack repair, joint filling, moisture checks and the number of coats. Two quotes can look similar on paper and cover completely different work.

That is why a quote that skips the prep details is worth questioning. Epoxy is only as good as the surface it bonds to.

Step 1: Measure the floor

You do not need to be exact. Pace it out or use a tape.

  • Multiply length by width in metres to get the square metres.
  • For an L-shaped or odd space, split it into rectangles and add them up.
  • Note any extras: steps, a side path, a workshop bench area, a laundry nook.

A typical double garage is a good example of why this matters. A few extra square metres of side space changes the material and labour more than most people expect.

Step 2: Take the right photos

Photos do half the work of a site visit. Take them in daylight with the doors open and the floor cleared as much as you can.

  • One wide shot from the doorway so the whole floor is visible.
  • Close-ups of any cracks, with a coin or tape beside them for scale.
  • Oil stains, rust marks or old paint patches.
  • Any existing coating, especially if it is peeling or bubbling.
  • The edges and door thresholds, where moisture and wear show up first.

Step 3: Know the age and history of the slab

This is the detail most people forget, and it matters a lot.

  • New slab? Concrete needs time to cure before coating. Our guide on how long to wait to epoxy a new slab covers the timing.
  • Old slab? Tell the installer about any previous paint, sealer or coating. Some need to be ground off before anything new will stick. See can you epoxy over old paint or tiles.
  • Ever damp? If water sits on the floor after rain or you see white salty marks, say so. Moisture is a common reason coatings fail.

Step 4: Say how you will use it

A floor for a parked family car is not the same job as a floor for a mechanic’s workshop or a busy warehouse. Tell the installer about:

  • Hot tyres, oil, brake fluid or chemicals.
  • Forklifts, trolleys or heavy equipment.
  • Wet areas, pool surrounds or outdoor exposure.
  • Whether you need extra grip for slip resistance.
  • The finish you want: plain, flake or metallic.

If you run a business, also mention how long you can afford to be out of action. Downtime changes how the job is planned.

Questions to ask before you say yes

  1. How will you prepare the surface? Diamond grinding is the standard answer for most slabs. Be cautious of anything that sounds like a quick wash and roll.
  2. Will you test for moisture?
  3. How many coats or layers are included?
  4. Are crack and joint repairs in the price?
  5. How long before we can walk on it and drive on it?
  6. What warranty do you give, and is it in writing?

A good installer will answer these without fuss. If the answers are vague, keep looking.

Red flags in a quote

  • A price given over the phone with no questions about the slab.
  • No mention of grinding or surface prep.
  • A very low price with a very long list of exclusions.
  • No written scope of work.

If you want to understand what drives price in general, read our epoxy flooring cost guide for Geelong.

Ready for a straight answer?

Send us your measurements and photos. We will tell you what the job involves and give you a clear, written quote with no surprises.

Call Joe on 0433 249 998 or fill in the form below.

Thank You!

Your quote request has been received.
Our team will get back to you shortly.

Request a Free Quote

Fill in your details and we will get back to you shortly.

Scroll to Top